AMCRAFT TOOLS
Quality Tools for the Job!

Hand Tools

Tools For Basic Grooving Methods

No Add Ons When Used With Amcraft Layout Square

redtool
90° V or Miter Cut.
#1100 - 1" Red Tool
#1084 - 1-1/2" Red Tool
#2100 - 2" Red Tool
#3000 - 3" Red Tool

For Cut # 2, 3 & 4


blutool
Fabricate 4 different end
cut-offs with a simple
change of blades.

#1102 - 1" Blue Tool
#1087 - 1-1/2" Blue tool
#2102 - 2" Blue Tool

NEW Light Blue Staple Flap only Tools designed to work with the #7000 Layout Square

#1104 - 1" Light Blue Staple Flap Tool 1-3/4" wide cut

#1088 - 1-1/2" Light Blue Staple Flap Tool  2-1/4" wide cut

#2108 - 2" Light Blue Staple Flap Tool  2-3/4" wide cut

For Cut # 5


g_bktool
Female or Rabbet Shiplap Cut.

#1201 - 1" Gray Tool:  7/8" wide x 1/2" deep female shiplap cut

#1101 - 1" Black Tool:  1-1/4" wide x 1/2" deep female shiplap cut
#1086 - 1-1/2" Black Tool:  1-3/8" wide x 3/4" deep female shiplap cut
#2101 - 2" Black Tool:  1-7/8" wide x 1" deep female shiplap cut

For Cut # 1


ortool
Modified Corner Shiplap

Makes right & left hand cuts.

1 Way Tool
#1402 - 1" Orange Tool Right cut
#1403 - 1" Orange Tool Left cut
#1412 - 1-1/2" Orange Tool Right cut
#1413 - 1-1/2" Orange Tool Left cut
#2104 - 2" Orange Tool Right cut
#2105 - 2" Orange Tool Left cut

2 Way Tool
#1400 - 1" Orange Tool cuts both ways
#1415 - 1-1/2" Orange Tool cuts both ways

/two_third_last]

For Cut # 2, 3, & 4


p_ytool
Reverse or Male Shiplap Cut

#1202 - 1" Purple Tool: 7/8" wide x 1/2" deep male shiplap cut

#1103 - 1" Yellow Tool 1-1/4" wide x 1/2" deep male shiplap cut

#1106 - 1-1/2" Yellow Tool 1-3/8" wide x 3/4" deep male shiplap cut
#2103 -  2" Yellow Tool 1-7/8" wide x 1" deep male shiplap cut


brntool
Male / Female Combination Cut
For making transitions, elbows, cutting shiplap into the board and making sections less than 4 feet. Cuts finished duct sections also.

#1350 - 1" Brown Tool
#1355 - 1-1/2" Brown Tool
#2106 - 2" Brown Town

Amcraft Kits

kit

#1001V - 1" 'V' Groove Kit includes - Case, #1201 Gray, #1100 Red, #1104 Light Blue, #1350 Brown, #7000 Layout Square, #6000 Cuts-All, #8000 Duct Knife, #7502 Naima Manual

#1001S - 1" Shiplap Kit includes - Case, #1201 Gray, #1400 Orange, #1104 Light Blue, #1350 Brown, #7000 Layout Square, #6000 Cuts-All, #8000 Duct Knife, #7502 Naima Manual - #1001S

#1501V - 1-1/2" 'V' Groove Kit includes - Case, #1086 Black, #1084 Red, #1088 Light Blue, #1355 Brown, #7000 Layout Square, #6050 Cuts-All, #8000 Duct Knife, Naima Manual

#1501S - 1-1/2" Shiplap Kit includes - Case, #1086 Black, #1415 Orange, #1088 Light Blue, #1355 Brown, #7000 Layout Square, #6050 Cuts-All, #8000 Duct Knife, #7502 Naima Manual

#2001V - 2" 'V' Groove Kit includes - Case, #2101 Black, #2100 Red, #2108 Light Blue, #2106 Brown, #7000 Layout Square, #6020 Cuts-All, #8001 Duct Knife, #7502 Naima Manual

#2001S - 2" Shiplap Kit includes - Case, #2101 Black, #2104 Right Orange, #2105 Left Orange, #2108 Light Blue, #2106 Brown, #7000 Layout Square, #6020 Cuts-All, #8001 Duct Knife, #7502 Naima Manual

White 'V' Groove Tools
Fabrication of either 10 or 12 sided duct.

#1030 - 1"

w30

Fabrication of 8 sided duct.

#1097 - 1"
#1597 - 1½"
#2097 - 2"

w45

Fabrication of 6 sided duct.

#1096 - 1"

w60

 

Layout squares & Trans, angle

Layout Square & Transition Angle
layout
#7000 -  Layout Square

Amcraft tools have built in add-ons to use with collapsible Layout Square. All you need is the inside dimensions (ID) only.


trans
#7002 - Silver Transition Angle Tool

For transitions or elbows and many other uses, easy measuring. Has 15° and 22½° angles.

 

Duct Knives

Duct Knives
ductknf
Duct Knives

Green handle Duct knife for scoring and stripping and cutting ductboard. We already rounded the corner for you.  Unlimited uses!

#8000 - 3-1/2" blade
#8001 - 6" blade


 

 

Cuts-all & Round Hole Cutters

Cuts-All & Round Hole Cutters
cuts_all
Cuts-All
Double-bladed male/female shiplap hand tool. Used in making transitions and take-offs as well as cutting finished duct sections.

#6000 - 1" Black Cuts-All
#6050 - 1-1/2" Black Cuts-All
#6020 - 2" Black Cuts-All


holec
Round Hole Cutter

#5001 Round Hole Cutter, Cuts 1", 1-1/2" and 2" duct board. Produces 3" - 20" holes for round duct tap-ins.

 

 

Replacement Blades for Hand Tools and Machines

Hand Tools, Cuts-all & Round Hole Cutters Replacement Blades
Regular Replacement Blades

All Amcraft's blades are produced with high strength steel and surface engineered with a new thermo chemical heat treating process.  This leaves a black surface finish that outperforms even hard chrome.
To Order: Add 'B' to tool number.
EXAMPLE: 1100B
for 1" 1100 Red Tool Blades.

Machine Replacement Blades

Amcraft's new machine blades are produced with high strength steel and surface engineered with a new thermo chemical heat treating process.  This leaves a black surface finish that outperforms even hard chrome. Prevents snags and rips in cutting. Fits most Glassmaster machines like: SG-220, E215, Amcraft's ACE 150, and Advanced Duct System's Magnum 1000.

1” BLADES       1-1/2” BLADES         2” BLADES       DESCRIPTION          

301-A                     601-A                         901-A             LH Staple Flap           

301-B                     601-B                         901-B             RH Modified Shiplap

301-C                     601-C                         901-C             LH Modified Shiplap

301-D                     601-D                         901-D             RH Modified Shiplap

301-E                     601-E                         901-E             RH Shiplap                

301-F                     601-F                         901-F             LH Shiplap                

301-G                    601-G                          901-G            RH Staple Flap          

301-SCO                601-SCO                     901-SCO       Straight Cut Off       

301-90V               601-90V                       901-90V         90* V                      

301-CMCO            601-CMCO                   901-CMCO       Close-master tape cutoff

 

 

Heat Seal Iron & Tape

Amcraft Heat Seal Iron

Best on the market for heat seal tape

iron
#7150 Amcraft Heat Seal Iron

Designed for long runs at constant 575° F. Fixed thermostat. Seals approx. 4' in 10 sec. High quality, Iron is 3-1/4" wide to cover 3" tape in one pass.


tape
#7300 Heat Seal Tape

For use with #7150 Heat Seal Iron. 490 UL181A-H heat activated foil tape. Used on all joints to assure vapor barrier integrity.